We ship Black and White models. Color is not guaranteed.

DOCSIS® 3.0 Certified: 343 / 172 Mbps (Downstream / Upstream)

Compatible with DOCSIS 3.0, 2.0, 1.1, and 1.0 networks

A detailed technical document (PDF) for forceWare, netSNMP (snmpget/set/walk), TCPDump, and other network tips & tools.

Arris Motorola SB6141 Modem, Pre-modded

Power Adapter: small-profile

Link to thorough PDF technical document on forceWare, alpha, and network tools

Links to Forums (which have tutorials and detailed info)

Links to firmware repository of all forceWare revisions

Dual boot images - You may use supplied forceWare FW versions to alter your dual-boot configuration! (e.g. Boot1 = v1.4, Boot 2 = v1.1 r11)

Changing your dual-boot config is as simple as pointing to a single file through the modem’s webpage

All DOCSIS & EuroDOCSIS 3.0 networks are compatible

Backwards compatible with DOCSIS 2.0, 1.1, and 1.0 networks

Access Firmware's GUI interface through a web browser: - http://192.168.100.1

GUI Username/Password: "admin"/"force" or "sbhacker"/"sbh"

Force configs

BPI+ Enable, Disable

Web UI firmware upgrading

Cert / Certificate save and upload via Web UI

Supports WinSCP, SSH shells

Additional command line parameters or functions such as: Busybox, nano, colors

SNMP Request Logging, Reply Spoofing

Custom LED control daemon And much more!

We respect your privacy. Seller does not maintain any firmware dumps of items sold (partial or full). This is for security and privacy. As such, Seller cannot and does not provide firmware dumps (images).

This item is sold solely for academic, professional, diagnostic and testing purposes only.

By purchasing this modem, you acknowledge that you know how to use it or are willing to learn how to properly configure the device. Configuration is required. Buyer also agrees that the device will be used with respect and in conjunction with their ISPs Terms of Service and any applicable laws or regulations.

Seller is not responsible for the use of this item. Buyer assumes all responsibility and liability.

The installation (flashing) of forceWare requires that the device be physical disassembled (opened), and as such there may be the following [but not limited to] physical defects: the item label is slit down the center, marks on the top of the device (near the internal plastic tabs), marks on the side of the device (near the internal plastic tabs). We take great care in handling the item so that you receive a pristine device, but please be aware that the devices have to be opened and may have some external marking. Also, flashing the device voids the manufacturer’s warranty.